Branches
Comments
[»]
A Problem
by ElQuijote - Nov 24th 2002 04:27:49
I had a problem installing Lopster-dev
I type "./autogen" and I recive this message:
configure.in:12: warning: AC_TRY_RUN called without default to allow cross
compiling
Makefile.am:22: ja in `ALL_LINGUAS' but po/ja.po does not exist
Makefile.am:22: it in `ALL_LINGUAS' but po/it.po does not exist
Makefile.am:22: ca in `ALL_LINGUAS' but po/ca.po does not exist
configure.in:12: warning: AC_TRY_RUN called without default to allow cross
compiling"
Later I type ./configure an later I type "make" and I recive
this error:
creating po/Makefile.in
creating po/POTFILES
creating po/Makefile
make[2]: Leaving directory `/home/raul/lopster/po'
make[2]: Entering directory `/home/raul/lopster/po'
make[2]: *** No hay ninguna regla para construir el objetivo `it.po',
necesario para `it.gmo'. Alto.
make[2]: Leaving directory `/home/raul/lopster/po'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/raul/lopster'
make: *** [all-recursive-am] Error 2
What's my problem. Thanks.
[reply]
[top]
[»]
Re: A Problem
by Giles - Dec 5th 2002 10:33:13
Try here:
http://www.cactuz.org/hangman/comp/lopster/lopster-cvs-install-news.html
[reply]
[top]
[»]
hey hey hey!!
by Yoda - May 21st 2002 18:05:47
I had a trouble.
Tell me what should I do clear this mulfunction
When start up lopster on RedHat linux ?
This trouble happens after when I connected server
, began searching, pushed "Go!".
And these msgs are put out...
$ Lopster started at Wed May 22 06:55:06 2002
sigseg: segmentation fault: 11
sigseg: rc-file was read
sigseg: geometry was read
sigseg: access list was read
sigseg: search patterns were read
sigseg: please report the reason if you know
--------------------------------------------------
sigseg: trying to do normal exit
sigseg: normal exit failed
sigseg: trying to save geometry
sigseg: geometry saved
sigseg: trying to save rc-file
sigseg: rc-file saved
sigseg: trying to log statistic
sigseg: statistic logged, exiting...
what did I do something wrong with ?
--
If you will not fight, you will meet your destiny.
[reply]
[top]
[»]
Nasty way to say I'm missing a rcfile =)
by Harri Haataja - Oct 1st 2001 04:48:41
[blades@remiel blades]$ lopster
Lopster started at Mon Oct 1 11:56:21 2001
** WARNING **: could not load rc-file
sigseg: segmentation fault: 11
sigseg: geometry was *NOT* read
sigseg: rc-file was *NOT* read
sigseg: last line read: [ERROR]
sigseg: It seems to be an upgrade problem
sigseg: Please report this problem (this output and a backtrace if you
know some
thing about)
sigseg: Deleting (renaming) the rcfile (~/.lopster/lopsterrc) should solve
the p
roblem
sigseg: please report the reason if you know
--------------------------------------------------
sigseg: trying to do normal exit
[reply]
[top]
[»]
Re: Nasty way to say I'm missing a rcfile =)
by Harri Haataja - Oct 1st 2001 04:50:23
> [blades@remiel blades]$ lopster
> Lopster started at Mon Oct 1 11:56:21
> 2001
>
> ** WARNING **: could not load
> rc-file
> sigseg: segmentation fault: 11
> sigseg: geometry was *NOT* read
> sigseg: rc-file was *NOT* read
> sigseg: last line read: [ERROR]
> sigseg: It seems to be an upgrade
> problem
> sigseg: Please report this problem
> (this output and a backtrace if you know
> some
> thing about)
> sigseg: Deleting (renaming) the rcfile
> (~/.lopster/lopsterrc) should solve the
> p
> roblem
> sigseg: please report the reason if
> you know
>
> --------------------------------------------------
> sigseg: trying to do normal exit
>
Hm, this seems to go deeper. I'll see if I can find the bug tracker...
[reply]
[top]
[»]
Re: Nasty way to say I'm missing a rcfile =)
by Harri Haataja - Oct 1st 2001 05:33:00
It was gdkxft, the
antialias patch for gdk.
Strace rules! :^)
[reply]
[top]
[»]
Re: Nasty way to say I'm missing a rcfile =)
by A.E. - Oct 5th 2001 10:18:39
>
> It was gdkxft, the antialias patch for
> gdk.
>
> Strace rules! :^)
>
>
MAN, you're a GOD!
Harri, what can I do now to get rid of this bug?
Do I have to *uninstall* resp. *remove* the antialias patch for gdk or
what else do I have to do?
andreas
[reply]
[top]
[»]
Re: Nasty way to say I'm missing a rcfile =)
by Harri Haataja - Feb 2nd 2002 08:12:43
>
> %
> % It was gdkxft, the antialias patch
> % for gdk.
> % Strace rules! :^)
> %
> MAN, you're a GOD!
> Harri, what can I do now to get rid of
> this bug?
> Do I have to *uninstall* resp.
> *remove* the antialias patch for gdk or
> what else do I have to do?
Hm. It uses that LD_PRELOAD variable hack, so just not setting that works.
I think I stopped using the patch.
Globally setting it also seemed to have the side-effect that it gets
linked in into every compiled gdk program :-(
[reply]
[top]
[»]
Best napster alternative!!!
by reina - Aug 13th 2001 08:19:57
Thank you! I love this full-featured software! Bye bye
napster! :)
[reply]
[top]
[»]
Lopster
by Mutation - Jan 22nd 2001 12:53:16
I recently needed a Napster client and tried gnapster and GTK-Napster.
GTK-Napster is a nifty-looking, but awfully buggy app, while gnapster is
great, but still gave me some trouble. Lopster is IMO even better than
gnapster and even looks better! (Transfer screen is excellent). More
features, easier to handle... Just great!
[reply]
[top]
[»]
Excellent!!!
by DiskMan - Jan 13th 2001 01:59:21
By far the BEST Napster client for X! Even works flawlessly with my custom
KDE/X wierdness! Has the most features I have seen in an X based client
that actually work! Keep up the excellent work! I hope there is a new
version sometime.
[reply]
[top]
[»]
Lopster Rules!
by ipsteal - Oct 5th 2000 19:13:53
By far it is the best Napster Clone I have yet seen/used.
The only things I would recommend for updating are:
1) When searching, supply a ping for the users the files come up for
2) Make a way to switch between requesting multiple files at once and
making a local queue for multiple get from users so that only one file is
requested at a time before the next.
Other than that, it rules. You can't go wrong with this program.
[reply]
[top]
[»]
I love it !
by inch pirate - Aug 22nd 2000 22:58:34
This is a great app. I would not have guessed that this was the first
release, had I not known already. Gnapster is still 'cleaner' in the looks
department, but that's mostly due to the limited feature set. I look
forward to using this more.
[reply]
[top]
[»]
Mailing list
by Sgop - Aug 20th 2000 08:14:04
In the next 24 hours a mailing list will be created for Lopster users
who have troubles with that client. Address
will be lopster-trouble@lists.sourceforge.net
A HTML-link will be at
Sourceforge
[reply]
[top]
|
