Branches
Articles referencing this project
Comments
[»]
Another brainteaser
by Sabine Miehlbradt - Apr 4th 2002 07:20:58
Hi, seems like we get them all. *g*
Well, today's problem is: VDR reboots on certain channels. Like
Sat.1, Pro-7 and Kabel 1. All channels on which this happens
are at frequency 12480. I do not get any error message, not
even a GPF and it's not an EmerncyExit either..
I seem to remember this to be some special band but
can't remember which. Unfortunately our radio specialist left
the company so I cant ask anyone else.
Anyone got an idea whats going on?
Thanks, Sabine
[reply]
[top]
[»]
Re: Another brainteaser
by Henning H. - Apr 6th 2002 07:28:28
> Well, today's problem is: VDR reboots
> on certain channels. Like
> Sat.1, Pro-7 and Kabel 1. All channels
> on which this happens
> are at frequency 12480. I do not get
> any error message, not
> even a GPF and it's not an EmerncyExit
> either..
At least some patched versions of VDR 1.0.0pre5 have problems with Pro-7's
AC3 APID. Nobody reported system reboots, though. Please subscribe to the
VDR mailing list and describe your problem there. There are more people
who can help you than here @fm.
[reply]
[top]
[»]
Re: Another brainteaser
by Johannes Feigl - Apr 6th 2002 07:47:01
hi Sabine
please write to the mailing list next times, so we can help you faster.
thx
look here:
http://www.linuxtv.org/mailinglists.xml
mfg johannes
[reply]
[top]
[»]
VDR configuration
by linuxwin - Feb 10th 2004 11:25:42
After many trials, I succeeded in getting my skystar 2 card driver
installed correctly. I installed VDR but I do not know how to configure it
and run it. I did vdr but nothing happened. I saw the cursor hangs up till
I did ctrl-c. Do I need to run another program with VDR to watch TV? How
can I set my 4 way diseqc and from where I can get the sat data other than
Astra?
[reply]
[top]
[»]
Bug: VDR hops channels after running for several hours
by Sabine Miehlbradt - Mar 26th 2002 10:57:53
We are using a slightly modified (streaming) 0.99 version of
VDR and have noticed that when it runs for a long time
(between 8 and 36 hours) VDR starts to hop channels by itself,
randomly changing channels every 4-15 seconds.
After restarting VDR this behaviour stops. Putting in a manual
chan does squat.
I'm reasonably sure this is no fault of my modifications. I'm
rather supecting the OSD code or the function that records
keypresses on the shell from where VDR is started.
We have not been able to find any pattern in the hopping and
we are sure nobody is pulling our leg by issuing telnet commands.
Has this happend to anyone else?
[reply]
[top]
[»]
Re: Bug: VDR hops channels after running for several hours
by Johannes Feigl - Mar 26th 2002 11:35:46
here the answere from klaus (the writer of the programm):
That's the EPG scanner starting after 5 hours of user inactivity.
Set the Setup parameter "EPG scan timeout" to 0 to turn this off.
[reply]
[top]
[»]
Will there be streaming?
by Sabine Miehlbradt - Dec 20th 2001 08:40:07
VDR works nice with us but streaming to a socket for uni/multi/broadcast is
sorely needed. Will streaming be included into VDR?
[reply]
[top]
[»]
Re: Will there be streaming?
by Johannes Feigl - Dec 21st 2001 00:20:15
Hi Sabine,
I know, somebody is working on it,
I believe in some weeks you (and I) can watch
via Network
mfg Johannes
> VDR works nice with us but streaming to
> a socket for uni/multi/broadcast is
> sorely needed. Will streaming be
> included into VDR?
[reply]
[top]
|
