WANPIPE
WANPIPE S-series is a family of intelligent multi-protocol WAN and ADSL adapters that support data transfer rates up to 8Mbps. All WAN protocols supported by WANPIPE are implemented in firmware and run on the card. An advantage of an intelligent adapter is that it offloads the system CPU and improves stability. By adding a Sangoma WAN/ADSL component to the Linux kernel, one can create a powerful multi-T1/ADSL router/firewall with proven reliability of Linux. Sangoma S-series cards support an optional on board T1/E1 CSU/DSU that eliminates all external components of a traditional routing solution: i.e. T1/E1 line can be directly connected to the card. WANPIPE supports the following protocols, ATM, ADSL, Frame Relay, PPP, MULTILINK PPP, CHDLC, X25(API), BitStreaming (API), BiSync(API), and SDLC(API). Furthermore, WANPIPE supports custom API development such as: Credit card verification, Voice-over IP, Satellite Comm. All device drivers are part of the standard Linux Kernel distribution.
| Tags | Communications Networking Operating Systems Operating System Kernels BSD Linux |
|---|---|
| Licenses | GPL |
| Operating Systems | Windows Windows POSIX BSD Linux SCO Solaris |
| Implementation | C C++ Perl |
Recent releases
- 22 Dec 2008 23:08
Changes: This release adds support for B600 Analog Card, task stop function on shutdown, X21 support, an option to run Zaptel & TDM API on the same span, and the XMTP2 API for old PMC T1/E1 cards. It fixes the TTY driver for Linux kernel 2.6.26 and greater, tristate mode using wanpipemon, yellow alarm handler on T1/E1, E3 support for A301 cards, Serial AFT card events, and the Channel Bank ring problem on AFT T1/E1 cards. It updates AFT Core to fix XMTP2 startup with 16E1 links.
- 05 Nov 2008 23:30
Changes: The TDM API has been updated to fix FreeSwitch analog support. Support has been added for analog TDM API TAPPING mode and Zaptel/DAHDI operation mode. An MTP2 option has been added to LibSS7. The TDM API has been updated for A200 to fix issues with FreeSwitch OpenZAP with TDM API for Analog. There is a minor bugfix in the XMTP2 API. The T1/E1 Loopback commands have been updated for the wanpipemon utility. Linux 2.6.25 and 2.6.26 support is fixed. The AFT driver has been updated to implement a new loopback command. Asterisk DAHDI support has been added. A possible race condition has been fixed in the A200/A400 Analog driver.
- 05 Sep 2008 22:54
Changes: This release adds bri and zaptel installation modes. It streamlines the Setup installation script. It has improved faxing over SMG Gateway and Zaptel Analog. It adds overlap dialing support. It adds support for BRI with 16-channel Echo Canceler. It fixes the BRI chip security handler. It is updated for new PLX and Tundra PCIe Bridges chips. It updates hwprobe verbose for PMC Shark, and is updated for the 2.6.25 kernel. 64-bit compilation for Octasic EC Image has been fixed. wancfg_smg has been updated to configure the XMTP2 API. MTP2 API support has been added.
- 05 Sep 2008 20:53
Changes: The Excessive Error check that disabled the port has been removed. Support for new PLX2 and TUNDRA PCIe chips has been added.
- 07 Jul 2008 13:17
Changes: hwprobe was updated to add the A056 card. wireshark tracing was added for wanpipemon PRI/BRI. Packet handling in bh was optimized for the LIP Layer. The code was updated for 2.6.24 and 2.6.25 kernels. Maxim T1 and E1 Rx Level now default to 36DB and 42DB respectively. Optional PCI parity check was added to wanrouter.
